PoS - Proceedings of Science
Volume 364 - European Physical Society Conference on High Energy Physics (EPS-HEP2019) - Detector R&D and Data Handling
The ATLAS Hardware Track Trigger design towards first prototypes
F. Pastore*  on behalf of the ATLAS Collaboration
Full text: pdf
Pre-published on: October 20, 2020
Published on: November 12, 2020
Abstract
In the High-Luminosity LHC, planned to start with Run 4 in 2026, the ATLAS experiment will be equipped with the Hardware Track Trigger (HTT) system, a dedicated hardware system able to reconstruct tracks in the silicon detectors with short latency. This HTT will be composed of about 700 ATCA boards, based on new technologies available on the market, like high-speed links and powerful FPGAs, as well as custom-designed Associative Memories (AM) ASICs, which are an evolution of those used extensively in previous experiments and in the ATLAS Fast Tracker (FTK). The HTT is designed to cope with the expected extreme high luminosity in the so called L0-only scenario, where HTT will operate at the L0 rate (1 MHz). It will provide good quality tracks to the software High-Level-Trigger (HLT), operating as co-processor, reducing the HLT farm size considerably, by lightening the load of the software tracking. All ATLAS upgrade projects are also designed for an evolved, so-called L0/L1 architecture, where part of the HTT is used in a low-latency mode (L1Track), providing tracks in regions of ATLAS at a rate of up to 4 MHz, with a latency of a few micro-seconds. This second phase poses very stringent requirements on the latency budget and to the dataflow rates. All the requirements and the specifications of this system have been assessed. The design of all the components has been reviewed and validated with preliminary simulation studies. After these validations are completed, the development of the first prototypes will start. In this paper we describe the status of the design review, showing challenges and assessed specifications, towards the preparation of the first slice tests with real prototypes.
DOI: https://doi.org/10.22323/1.364.0119
How to cite

Metadata are provided both in "article" format (very similar to INSPIRE) as this helps creating very compact bibliographies which can be beneficial to authors and readers, and in "proceeding" format which is more detailed and complete.

Open Access
Creative Commons LicenseCopyright owned by the author(s) under the term of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.